Hi I’m Karen for Expert Village. Now put your
hand in there and take the eye and poke the end through the hole. The hole is tight and
if you pull on it so you can see it like that. The hole is not too big; it is a good size.
Then you place the disk on like this and the steam here is ridge and it is ridged in such
a way that the disk snaps on but you can not pull it off. These are safety eyes. You just
really want to push it down so it snaps in really tight and that is what it looks like.
Now that is one eye and now find the hole. Put the other eye and push that through and there it is. You
can push the fabric down around it and the safety cap push it nice and tight. Squeeze
that down. There now you have eyes. Now if you didn’t buy the eyes, if you don’t have
the eyes and you want to use buttons this is the time to sew on the button. You would
sew it on there and then turn it inside out and do some really good reinforcement stitching
going through the back. You would want to, you would do a lot of stitches so you would
sew that button nice and tight that no child would be able to pull it off. Okay because
buttons can be a choking hazard. Next we are going to stuff our horses head.